Some knowledge of Torsional Filter in china

Time：

2022-07-30

The Torsional Filter in china has a filter element, a gap is provided between the filter element and the side wall and the middle plate of the casing, and the gap communicates to form a filtrate cavity, the upper part of the shell is provided with a filtrate outlet, and the filtrate outlet communicates with the filtrate cavity.

Torsional Filter in china has a filter element. There is a gap between the filter element and the side wall of the shell and the middle plate. The gap is connected to form a filtrate cavity. The upper part of the shell is provided with a filtrate outlet, which communicates with the filtrate cavity. The filter element is fixed in the filter chamber. On the middle plate of the filter, the middle plate is sleeved on the main shaft, the main shaft is connected to the driving device, the driving device is arranged on the top of the filter housing, the lower part of the housing is provided with a filtrate inlet, the filtrate inlet is communicated with the filter element, and the sewage outlet is arranged in the shell The bottom of the body is connected with the solenoid valve, and the intermediate disc is fixedly connected with the main shaft. The main shaft drives the intermediate disc to perform centrifugal rotation under the drive of the driving device. The filter element fixed on the intermediate disc also performs centrifugal motion. It can quickly enter the filtrate cavity through the filter hole, which greatly improves the filtering efficiency.

In summary, this is a brief introduction to some knowledge about Torsional Filter in china.